BGAN M2M Satellite Terminal
The Hughes 9502 IP satellite terminal provides reliable connectivity over the Inmarsat BGAN network for IP SCADA and machine-to-machine (M2M) applications.
The device is offered in one-piece or two-piece form factors as well as a variant compliant for operation in Hazardous environments.
Key Features
- Easy to Install
- Service using Inmarsat BGAN or BGAN M2M provided by Ground Control
- Ultra-low power consumption
- Integrated IP Watchdog to ensure “always-on” network connectivity
- Remote control via SMS
- Supports multiple network modes: NAT, Relay, NAPT & PPoE
Tech Specification
- Two-Piece Indoor: 150 x 200 x 45 mm, 1.2 Kg (2.64 lbs)
- Two-Piece Antenna: 385 x 385 x 33 mm, 1.9 Kg (4.18 lbs)
- One-Piece: 275 x 275 x 84 mm, 3.8 Kg (8.4 lbs)
- Operating Temperature: -40° C to +75° C
- Storage Temperature: -55° C to +75° C
- Humidity: 95% RH at +40° C
- Antenna Wind Loading: Survival wind loading (with optional mount) up to 100 mph
- Environmental: One-Piece: IP66, Two-Piece: (IDU) IP40, (Antenna) IP65
- Power: +12 Vdc/+24 Vdc nominal
Overview
The 9502 terminal delivers affordable, global, end-to-end IP data connectivity enabling applications in industry sectors such as environmental monitoring, SmartGrid, pipeline monitoring, compressor monitoring, well site automation, video surveillance, and out-of-band management to primary site communications.
The exceptional low power consumption (1W idle) of the Hughes 9502 makes it possible to provide end-to-end IP connectivity to sites that are off the grid. This breakthrough provides end-to-end IP connectivity to power-challenged locations that rely upon solar- battery arrays involving sensitive power budgets.
Antenna Positioning Flexibility
The Hughes 9502 includes 10 meters of RF cabling, granting the user freedom to position the antenna remotely and away from the transceiver in complex installations while securing the SIM card inside a premise or enclosure to better protect against unauthorized use, theft, and vandalism.
The One-Piece 9502 is also identical in service performance to the two-piece 9502, even though it has a smaller antenna. Both systems are class 2 BGAN terminals. Only a 12-volt power cable and an Ethernet cable are needed for the cable run to this device. Exterior-rated Ethernet cables are rated for 328 foot (100 meter) cable runs.
The Hughes 9502 includes the One-Piece terminal, a padlockable security bar that keeps the enclosure caps from being removed, and four mounting bolts. We recommend the mounting bracket when purchasing the One-Piece 9502.
Interested?
Feel free to ask us your questions or request an offer.
CONTACT